★★★★★ 4.9 · 770+ Google reviews
Wrought Iron Gate Repair & Installation
Nothing says permanence like an iron gate, but when rust, sagging, cracked welds, worn hinges, failing posts, or operator problems set in, professional iron gate repair is what restores its security, function, and curb appeal. For homeowners and commercial property owners, Garage Tec provides expert wrought iron gate repair and installation, including welding repairs, rust restoration, hinge replacement, post repair, refinishing, gate operator service, automation upgrades, and new gate installation built to swing true for decades.
Wrought Iron Gate Repair
Iron gates rarely fail all at once. They fail slowly (a hinge wears, rust blooms at a weld, the gate starts to drag) until one day it won't move at all. Because iron is repairable in a way other materials aren't, almost any iron gate can be brought back. Our technicians combine structural welding with gate automation expertise, so both the iron and everything that moves it get fixed in the same visit.
Iron Gate Repairs We Handle
Welding repair
Cracked and broken welds, split joints, and fractured pickets rewelded properly, with the surrounding metal prepped so the repair holds.
Rust repair and restoration
Surface rust ground back and refinished; rusted-through sections cut out and replaced with new steel before corrosion spreads to the frame.
Sagging iron gate repair
Iron is heavy, and sag is its signature problem. We rehang gates, replace worn hinges with load-rated hardware, and reinforce frames so the gate carries its own weight the way it was meant to.
Hinge repair and replacement
Seized, worn, and undersized hinges replaced with heavy-duty and adjustable bearing hinges built for iron's weight.
Post repair
Leaning and shifted posts re-set and reinforced; rusted post bases repaired or replaced before the gate comes down with them.
Bent picket and scrollwork repair
Impact-damaged pickets straightened or replaced, and decorative scrollwork repaired or refabricated to match the original design.
Vehicle impact repair
Struck gates straightened, rebuilt, and re-hung, with damaged sections refabricated where straightening isn't enough.
Latch and lock repair
Gate latches, drop rods, magnetic locks, and electric strikes serviced and replaced.
Refinishing and rust prevention
Gates stripped, primed, and refinished in powder coat or premium exterior coatings that put decades between your gate and its next rust problem.
Gate operator repair
Openers on automated iron gates serviced across all major brands, including operators straining because the iron gate they move outweighs their rating.
Automation upgrades
Manual iron gates automated, and aging opener systems on iron gates modernized with UL 325 safety devices.
Common Iron Gate Problems
- The gate drags on the ground or screeches at the hinges
- Rust spreading at welds, joints, and the bottom rail
- Pickets or scrolls bent from an impact
- The gate no longer meets its latch, or the double gates don't meet in the middle
- The post is leaning or feels loose and is taking the gate with it
- The opener strains, stalls, or has burned out (often because it was undersized for iron)
- Paint failing in sheets with corrosion underneath
Iron problems compound quietly and then suddenly. The gate that drags this month is the seized hinge and cracked weld of next season. Call (888) 217-2664 while the fix is still a small one.
Old Iron Is Worth Saving
Older wrought iron and ornamental gates are often better made than anything replacing them, with hand work that would be costly to reproduce. Before anyone tells you to scrap an old iron gate, let us look at it. Rust repair, section replacement, rehanging, and refinishing routinely bring decades-old gates back to service and beauty for a fraction of replacement cost.
Wrought Iron Gate Installation
A new iron gate is a long-term investment, and installing it right is what protects that investment. Iron's weight is the whole game: posts, footings, hinges, and operators all have to be specified for it, and when they are, an iron gate outlasts everything around it.
Wrought Iron Gates We Install
Wrought iron driveway gates
Single and double swing gates for residential entrances, from clean picket designs to full ornamental work.
Sliding iron gates
Track and cantilever designs for sloped driveways, wide openings, and properties with limited space, since they avoid the swing arc of a standard gate.
Ornamental iron gates
Scrollwork, arches, finials, rings, and hand-detailed designs matched to your home's architecture.
Modern iron and steel gates
Flat bar, horizontal slat, and minimalist designs for contemporary properties.
Estate and entrance gates
Grand double gates with lighting, address work, and custom emblems.
Iron security gates
Extended height, anti-climb picket spacing, and heavy construction for maximum protection.
Iron and wood combination gates
Iron frames with wood infill for privacy and warmth.
Matching pedestrian gates and fencing
Walk gates and fence runs built to the same design as the main gate, including coordinated openings alongside wrought iron fences.
Commercial iron gates
Professional entrance gates for offices, communities, and business frontage.
Built for Iron's Weight
Every Garage Tec iron gate installation includes:
Posts and footings engineered for the load
Deep-set, properly sized gate posts in concrete footings, because iron gates fail at the post before they fail anywhere else. Post-hole depth is set at roughly one-third of the post height plus six inches, and each post is checked with a level during installation to keep it straight.
Load-rated hinges
Heavy-duty and adjustable bearing hinges specified for the gate's actual weight, not a generic bracket.
Square, braced fabrication
Frames built to carry their own weight without sagging.
Finishes that fight rust
Powder coating and premium exterior systems that protect the iron for decades, not seasons, with concrete allowed to cure to the manufacturer's instructions for stability before the load is relied on.
Automating an Iron Gate
Iron gates and automation are a perfect match, if the operator is sized honestly. An ornamental iron gate can weigh several times what a stock aluminum gate weighs, and an undersized opener will strain, stall, and die young. We size swing and slide operators for the finished gate's true weight and cycle count, with:
- ✓ Residential through continuous-duty commercial operators
- ✓ Battery backup and solar power options
- ✓ Keypads, video intercoms, card readers, and smartphone access
- ✓ Free-exit sensors and auto-close timers
- ✓ UL 325 compliant photo-eyes and safety edges on every installation, tested before we leave
Caring for an Iron Gate
Iron rewards a little attention with a very long life:
- ✓ Wash the gate a couple of times a year to strip road salt and grime
- ✓ Touch up chips and scratches promptly, because rust starts where the finish breaks
- ✓ For homeowners handling minor upkeep between visits, basic tools like a wire brush, wrenches, and rust-inhibiting primer are usually enough for small touch-ups.
- ✓ Keep hinges lubricated and listen for new sounds to help ensure smooth operation
- ✓ Watch the bottom rail and post bases, where water sits and rust starts
- ✓ Schedule periodic professional maintenance so hinges, welds, and the operator are inspected before small problems grow
Ask about our maintenance plans for automated iron gates.
Why Choose Garage Tec for Iron Gates
- Welding and fabrication capability – Real structural repair and ornamental restoration, not just parts swapping.
- Iron-rated installations – Posts, hinges, and operators specified for iron's true weight.
- Gate and automation under one roof – The iron, the opener, the safety devices, and the access control handled by one company.
- We repair gates we didn't build – Including old ornamental iron other companies won't touch.
- Honest recommendations – We take time to understand customers' priorities first, then recommend restoration when the iron is worth saving, replacement when it isn't, and explain the reasoning either way.
- Upfront pricing – A written quote you approve before work begins.
- Written workmanship warranty – Garage Tec can provide a written workmanship warranty for qualifying iron gate repair work.
Wrought Iron Gate FAQs
How much does wrought iron gate repair cost?
It depends on the damage. Hinge replacement, latch work, and picket straightening are on the affordable end; structural rust repair, refabricated sections, and refinishing cost more. Some repairs require more fabrication or replacement materials than others, which is why pricing can vary from one project to the next. We assess on site and quote in writing before any work.
How much does wrought iron gate installation cost?
Pricing depends on size, design complexity, swing vs. slide, automation, and access control. You can select from different gate types and design details depending on space, layout, and automation needs. A clean picket swing gate costs far less than ornamental double estate gates with video entry. A free on-site estimate provides exact numbers.
Can a rusted iron gate be saved?
Usually, yes. Surface rust is cosmetic and fully repairable. Even rusted-through sections can be cut out and replaced with new steel for long-term durability after proper rust removal and refinishing. Iron is generally only beyond saving when corrosion has consumed the structural frame, and we'll tell you honestly which side of that line your gate is on.
Why is my iron gate sagging?
Iron's weight wears hinges and levers against posts constantly. Sag means worn or undersized hinges, a shifting post, or a frame that needs reinforcement, and we correct all three.
Is wrought iron actually used in modern gates?
Most modern "wrought iron" gates are fabricated from steel, which offers the same look with more consistent strength. True historic wrought iron appears in older gates, and we repair and restore both.
Do iron gates rust?
Iron and steel will rust where the finish fails, which is why finish quality and upkeep matter. Powder coating and prompt touch-ups keep a gate rust-free for decades, and our refinishing service resets the clock on older gates.
Can my iron gate be automated?
Almost always, if the gate and posts are sound. If you have unusual site conditions or custom requirements, we can discuss them before installation start. The key is an operator honestly rated for iron's weight, with UL 325 safety devices, which is exactly how we build them.
How long does a wrought iron gate last?
With a quality finish and basic maintenance, 50 years is common and 100 is possible. Iron gates are frequently the oldest working thing on a property.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Iron Worthy of Your Entrance
Whether your iron gate needs a weld, a rescue, or you're ready for a gate that will outlast every fence around it, Garage Tec has the craft and the automation expertise to deliver. Call (888) 217-2664 for wrought iron gate repair or a free installation estimate.