★★★★★ 5.0 · 1,037+ Google reviews
Roanoke Gate Repair
When you need Roanoke gate repair, automatic gate repair in Roanoke, gate replacement in Roanoke, or driveway gate installation in Roanoke, Garage Tec Automatic Gates & Garage Door Repair handles residential and commercial gates across Roanoke with same-day service, upfront written pricing, and local dispatch from our Fort Worth and Denton offices.
Roanoke packs a lot of different gate setups into a small footprint, from HOA and driveway gates in Fairway Ranch, Westlake and Trophy Club to ranch gates north toward Marshall Creek and Justin, plus heavy-cycle commercial slide gates along TX-170, US-377 and the Alliance corridor.
For Texas homeowners and commercial property owners in Roanoke and the surrounding area, fast gate service matters because a failed gate affects security, access control, deliveries, tenant entry, and day-to-day property use.
We repair automatic gate systems, troubleshoot openers and photo eyes, replace damaged gates, install new driveway gates, and handle emergency service, access control upgrades, and maintenance for properties that cannot afford long downtime. Denton County clay heaves posts, wind off the open ground loads wide panels, and hail takes out sensors, so you get a stocked truck, a same-day appointment seven days a week, and a written price before work begins.
Gate Repair in Roanoke, TX
We provide automatic gate repair in Roanoke for estate gates, HOA entrances, ranch drives and the commercial slide gates along the Alliance corridor, and most calls are finished on the first visit. Expect a repair of complete gate systems, not just the operator, usually completed the same day.
Gate opener repair
Residential and commercial operators of every major brand, from Ghost Controls to HySecurity. Drive motors, gear reducers, clutches, boards and limit settings.
Gates stuck open or closed
Top of the dispatch list in Roanoke, since either failure causes a problem right away.
Gate opens but won't close
Nine times out of ten it is a safety input: a dirty or misaligned photo-eye, a damaged edge sensor or a loop that thinks a car is still there.
Sliding gate repair
Slide gates that stall, derail or run rough, fixed at the rollers, track and drive chain.
Swing gate repair
Sagging panels, seized hinges and posts heaved by the Denton County clay, which shifts enough around Roanoke that a gate hung plumb in spring can drag by the end of summer.
Apartment and community gate repair
The gated communities off US-377 and TX-114 and the townhome entrances near downtown run all day, so Roanoke HOA boards and property managers get priority response when an entrance gate fails.
Access control, loop and sensor repair
Access control that has stopped talking to the gate, diagnosed and reprogrammed on site.
Storm and surge damage
A lightning strike or power surge usually takes the control board. We replace it and offer surge suppression for the next one.
Welding and structural repair
Frame, hinge and picket repairs plus restoration of older ornamental iron in Roanoke.
Gate Replacement in Roanoke
Repeated repairs on an aging gate add up quickly, and at some point a replacement is the smarter spend. Signs it is time: rusted frames or post bases, posts leaning out of plumb, an operator with no parts left and no UL 325 safety, or a light gate on a busy entrance.
When an estate gate's operator has been discontinued and the panel is rusting at the welds, gate replacement in Roanoke is the cleaner answer. We replace the gate, operator and access control as one project sized for the drive, with each custom gate built to the exact width and height of the opening, ensuring proper fit and clearance. We walk through gate style, hardware and material choices based on the property. Typical installed pricing for driveway gate installation in Roanoke runs from $1,800 to $8,500+, and most residential openings are 10 to 16 feet wide; wider or dual-swing layouts raise labor and material costs. Nothing healthy gets thrown out. Sound posts and working operators stay, and you see both numbers before any decision.
Main cost drivers are automation and power, site preparation, and gate construction, and heavier aluminum and steel designs can push installation costs higher because they affect fabrication and setup. When installation is the right call, site preparation may include leveling and heavy-duty anchoring, every gate includes steel anti-sag kits and heavy-duty hinges, pool access gates must meet Texas safety codes, and replacement operators can be installed in LiftMaster and Elite models when appropriate.
Automatic Gate and Driveway Gate Installation in Roanoke
Our driveway gate installation in Roanoke ranges from a decorative dual-swing iron gate on an estate lot off TX-114 to a plain steel ranch gate with a solar operator on acreage toward Marshall Creek. For the newer subdivisions, a single aluminum swing gate with a keypad and phone-app opener is the common request, and we handle the columns and electrical.
Estate and driveway swing gates
Steel and aluminum swing gates in one or two leaves, built to suit Roanoke driveways.
Sliding and cantilever gates
A space-saving choice for tight setbacks, grades and commercial traffic.
Custom ornamental iron
Custom scrollwork, laser-cut panels and lettering, with fence sections to match.
Community and apartment entrances
Commercial-duty operators and the access control a busy community needs.
Commercial slide, cantilever and barrier-arm systems
Heavy slide and barrier systems for Roanoke businesses that move vehicles all day.
You get an operator matched to the gate, battery or solar backup if needed, tested safety devices, and a full handover of the access controls. A sound manual gate does not need replacing; we can motorize it.
Roanoke Gate Company
A Roanoke gate company has to cover estate drives, HOA entrances and Alliance-area commercial yards in the same day. We offer maintenance plans, access-control and intercom upgrades and garage door service, so a homeowner, board or facility manager has one call for every opening.
Automation and access control
Correctly sized operators and the full range of access control, from keypads to phone apps.
Preventive maintenance
Regular visits to adjust alignment, lubricate the operator and test every safety device. It is the cheapest way to keep a heavily used gate out of the repair queue.
Priority response for property managers
HOA, apartment and commercial entrances get priority scheduling because one failure strands everyone.
Solar and off-grid
Ideal for long drives and acreage where trenching power to the gate is not practical.
Serving Roanoke and Surrounding Communities
We serve all of Roanoke, from the historic blocks around Oak Street to the subdivisions along US-377 and TX-114 and the commercial corridor on TX-170, plus the surrounding area: Trophy Club, Westlake, Keller, Southlake, Haslet, Justin, Northlake, Argyle and Fort Worth. Roanoke calls are dispatched from our Fort Worth and Denton offices, so a stocked truck is rarely far away.
Roanoke service
Garage Tec Automatic Gates & Garage Door Repair
(888) 217-2664 · Open 24 hours, 7 days a week
info@garagetec.org
Why Roanoke Chooses Garage Tec
- Gates are core work, not a sideline – operators, access control and ironwork are our specialty, and we handle the garage door as well.
- Alliance-corridor commercial gates – The distribution and truck yards along TX-170 and I-35W run high-cycle slide gates on HySecurity, DoorKing and LiftMaster commercial operators. We service them and can keep a yard secured while the fix is scheduled.
- Estate and ranch gates together – Roanoke has decorative estate gates toward Westlake and working ranch gates toward Justin in the same zip code. We carry parts for both, from intercom systems to solar batteries.
- Honest replace-vs-repair math – we quote repair and replacement side by side and tell you which we would choose.
- Same-day service – fully stocked trucks mean fewer return trips and same-day fixes, even on weekends.
- Upfront pricing – the price is in writing and approved by you before work starts. No surprise charges.
- Licensed, bonded and insured – full coverage on every visit.
- Reviews you can verify – 1,037+ Google reviews at a 5.0-star average. Read a few before you call.
Roanoke Gate FAQs
Do you offer same-day gate repair in Roanoke?
Yes, in most cases. Operator parts, photo-eyes, loops, rollers and hinges ride on every truck because gates are one of our core gate services, not a sideline. Priority dispatch applies to any gate stuck open or closed. The earlier you call, the more likely we can come today.
My gate opens but won't close. What's wrong?
Almost always a safety device: a blocked or misaligned photo-eye, a faulty edge, or a vehicle loop stuck in detect. The operator is working as designed; the sensor is what needs attention. We diagnose the fault and eliminate communication issues between the operator and connected devices when that's what is stopping the close cycle.
Why is my gate or fence post leaning?
Texas clay swells and shrinks with the weather and takes posts with it. We re-set and reinforce posts so gates hang true again instead of shimming the hinge every year.
Our slide gate at a warehouse on TX-170 is slow and grinding. Do we need a new operator?
Usually not. Worn rollers, a stretched chain or a dry track cause most of that. Heavy panels and high-cycle use create wear over time. We replace the wear parts, adjust the chain and check the motor load, and we tell you in writing if the operator is actually near the end.
Can you match a new driveway gate to the stone columns on our house off TX-114?
Yes. We build decorative iron and aluminum gates to fit existing columns using premium materials and can add or rebuild columns if the hinge side needs more support for a heavy panel. We also check swing clearance and test for smooth operation before we wrap up.
My gate opener died after a thunderstorm. Fixable?
Very likely. The control board is the usual casualty, and it is replaceable on nearly all models. Surge protection is available to prevent it happening again.
How much does gate repair cost in Roanoke?
It depends on the failure. Small parts and adjustments are affordable; major components and welding are priced higher. The price is written down and agreed before we begin.
Do you work on all gate opener brands?
Yes. LiftMaster, DoorKing, Viking, Eagle, All-O-Matic, Nice/Apollo, HySecurity, Mighty Mule, Ghost Controls, US Automatic and more, residential and commercial, with the same level of coverage for estate, HOA, and commercial gate work in Roanoke.
Can you automate my existing manual gate?
Usually, yes, if the gate and posts are structurally sound. Our team handles estate and ranch conversions in Roanoke with the same crew that does other local gate jobs. Operator, safety devices and access control added to what you have, and the finished setup should look great.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Gate Service in Roanoke
Call (888) 217-2664 for Roanoke gate repair, a commercial gate on the Alliance side or a new driveway gate, and we will have a truck from Fort Worth or Denton out today.