★★★★★ 5.0 · 1,037+ Google reviews
Kirby Gate Repair
Kirby is a small city on the east side of San Antonio between Loop 410 and FM 78, and most of it was built in the 1960s and 1970s on modest lots. The gates here are practical: chain-link and ornamental steel driveway gates on the homes along Binz-Engleman Road, Ackerman Road and Gibbs Sprawl Road, apartment entrances near FM 78, and slide gates at the warehouses and yards along FM 78 toward I-10.
What breaks them in Bexar County is clay that leans posts each wet spring, rust on older chain-link frames, vehicle strikes at yard entrances, and boards that took a summer storm. Our trucks carry operators, boards, hinges and loops, same-day seven days a week, with a written price before work begins.
Kirby calls are dispatched from our San Antonio office, minutes away on Loop 410.
Gate Repair in Kirby, TX
A call for automatic gate repair in Kirby is often an older chain-link or steel swing gate with a worn hinge and a leaning post, or a slide gate at a yard on FM 78 with worn rollers and a stretched chain. We carry parts for the common LiftMaster, Mighty Mule, DoorKing and All-O-Matic operators and finish most repairs on the first trip. We work on complete gate systems rather than just the operator, and most jobs are done in one trip.
Gate opener repair
Swing and slide operators from LiftMaster, DoorKing, Eagle, Nice/Apollo, Mighty Mule and others. Motor, drive train, electronics and limits diagnosed and repaired.
Gates stuck open or closed
Handled first: a stuck-open gate leaves the property exposed, and a stuck-closed one blocks the entrance.
Gate opens but won't close
Usually a sensor problem rather than the motor: photo-eyes, reversing edges and exit loops are tested and fixed on the spot.
Sliding gate repair
Track cleaning and repair, new rollers and chain, and alignment for gates that bind.
Swing gate repair
Sagging panels, seized hinges and posts heaved by Bexar County clay on the east side, where the soil around Kirby is heavy enough to lean a shallow post noticeably after one wet season.
Apartment and community gate repair
The apartment communities near FM 78 and the rental properties along Binz-Engleman Road count on entrance and driveway gates working every day, and property managers in Kirby get priority response.
Access control, loop and sensor repair
Keypads, call boxes, intercoms, card and fob readers, loops and sensors repaired and reprogrammed.
Storm and surge damage
Storm season in Kirby is hard on gate electronics; we swap surge-damaged boards and can fit protection against a repeat.
Welding and structural repair
Welding for broken hinges, cracked frames and gates hit by vehicles.
Gate Replacement in Kirby
Once a gate needs a repair every few months, replacing it usually costs less over the next few years. In Kirby that usually means rust through the frame, posts moved by shifting clay soil, an obsolete operator, or a gate never built for the traffic it now carries.
When a 1970s chain-link gate has rusted through at the bottom rail or an old operator has no parts left, gate replacement in Kirby is the better spend. We reuse sound posts and wiring where they will last and keep the replacement practical. We keep whatever is still sound, from posts to loops, and quote repair and replacement side by side before you decide.
Driveway Gate Installation in Kirby
Typical driveway gate installation in Kirby is a straightforward ornamental steel or aluminum swing gate sized to a standard lot off Ackerman Road or Gibbs Sprawl Road, with a keypad and phone-app control. Driveway gate installation in Kirby varies by gate type, automation, electrical needs, and site conditions. Most projects land between $1,800 and $9,500. For the warehouses and yards along FM 78 we install heavy slide gates with loop detection and card or keypad access for added convenience. Posts are set deep to ride out the clay.
Estate and driveway swing gates
Swing gates sized to the drive and finished to match the home. In Kirby, a new residential swing gate installation typically runs $1,800 to $5,200.
Sliding and cantilever gates
Slide and cantilever designs suit short drives and sloped lots in Kirby. Sliding gate installation in Kirby typically ranges from $3,800 to $9,500, with most residential slide gates falling between $4,200 and $7,800.
Custom ornamental iron
Fabricated to your drawing or ours, with matching fence and pedestrian gates. Chain-link gates usually cost less than wrought iron or steel gates.
Community and apartment entrances
Operators rated for hundreds of cycles a day, with telephone entry and phone-app access for residents.
Commercial slide, cantilever and barrier-arm systems
Built for commercial sites with steady truck traffic and a hard close at the end of the day.
Every installation includes an honestly sized operator, battery backup or solar where needed, and a walkthrough of the access controls before we leave, with safety sensors and any required electrical work affecting automatic gate pricing. Depending on site conditions, concrete footings or post replacement may also be needed. Already have a manual gate in good shape? We can automate it, and modern openers can often be retrofitted onto older swing gates; in Kirby, opener installation typically costs $1,100 to $3,400.
Kirby Gate Company
A Kirby gate company should be quick to reach and honest about what a modest gate needs. We do scheduled maintenance for yards and apartments, keep older driveway gates running without overselling, and cover the garage door on the same visit; sliding gates are common on both residential and commercial properties when space or traffic makes them the better fit.
Automation and access control
Gate operators sized for the gate's weight, length and cycle count; keypads, telephone entry, video intercom, card and fob readers, and phone-app access.
Preventive maintenance
A maintenance schedule for Kirby gates covering alignment, lubrication and safety testing. It cuts emergency calls and extends the life of the system, helping it stay durable and dependable over time, especially for HOAs and commercial properties.
Priority response for property managers
One entrance down affects everyone behind it, so our team gives managed properties first call.
Solar and off-grid
For rural drives and properties where the location makes running power to the gate impractical.
Commercial service needs
Commercial driveway gates are designed for high traffic volume, so we account for heavier daily use when planning repairs, maintenance, and replacement.
Serving Kirby and Surrounding Communities
We serve all of Kirby, TX, from the neighborhoods along Binz-Engleman Road, Ackerman Road and Gibbs Sprawl Road to the commercial stretch along FM 78, plus the surrounding area: Windcrest, Converse, Live Oak, Universal City, Schertz, St. Hedwig, China Grove and east San Antonio. Kirby calls are dispatched from our San Antonio office, so a truck is ready and rarely more than a few minutes away on Loop 410 or I-10.
Kirby service
Garage Tec Automatic Gates & Garage Door Repair
(888) 217-2664 · Open 24 hours, 7 days a week
info@garagetec.org
Why Kirby Chooses Garage Tec
- Gates are core work, not a sideline – operators, access control, ironwork and the garage door too, from a single company with experience across trusted systems.
- Older gates on modest lots – Most Kirby driveway gates are decades old and were automated after the fact. We know how to keep a chain-link or light steel gate hanging straight and running on an operator without replacing the whole thing for homeowners.
- Yard and warehouse slide gates – The FM 78 corridor is full of working yards. Our technicians stock the rollers, chains, loops and boards those slide gates burn through and rate replacements for truck traffic.
- Honest replace-vs-repair math – both numbers in writing, with options that fit your budget, and the recommendation we'd choose at our own house.
- Same-day service – most repairs are finished in one visit, including Saturdays and Sundays.
- Upfront pricing – a written quote you approve before any work begins, with no hidden fees.
- Licensed, bonded and insured – on every call, no exceptions.
- Reviews you can verify – 5.0 stars across 1,037+ Google reviews you can read for yourself.
Kirby Gate FAQs
Do you offer same-day gate repair in Kirby?
Yes, in most cases. Trucks are stocked with operator parts, photo-eyes, rollers and hinges. A gate stuck open or closed gets priority dispatch, and we aim to arrive on time. Calling before noon gives you the best shot at same-day service.
My gate opens but won't close. What's wrong?
Almost always a safety device: a blocked or misaligned photo-eye, a faulty edge, or a vehicle loop stuck in detect. The gate is protecting itself, and servicing the sensor solves it.
Why is my gate or fence post leaning?
Texas clay swells and shrinks with the weather and takes posts with it. We re-set and reinforce posts so gates hang true again instead of shimming the hinge every year; that is the lasting fix.
My 1970s chain-link driveway gate has an operator that still runs but the gate drags. Is the gate worth saving?
If the frame is not rusted through, yes. New hinges, a plumbed post and reset operator limits usually get it swinging clean. If the frame is gone, we show you a replacement in writing rather than patching it.
Our yard gate on FM 78 gets hit by delivery trucks. What can we do?
Better lighting, a wider approach, reflective panels and a breakaway bracket reduce strikes. When one happens, we prioritize commercial entrances so the yard is secure the same day.
My gate opener died after a thunderstorm. Fixable?
Very likely. Storm damage tends to hit the board first, which is a routine replacement on most operators. If the control board is obsolete, a full operator replacement may be the only practical option. Ask about surge protection while we are there.
How much does gate repair cost in Kirby?
It depends on the failure. Simple fixes like limits, remotes, sensors and hinges cost the least; boards, motors and welding cost more. Quotes also depend on the gate type, operator, labor, and site conditions. You get an exact written quote before any work starts, and we can provide repair and replacement options.
Do you work on all gate opener brands?
Yes. LiftMaster, DoorKing, Viking, Eagle, All-O-Matic, Nice/Apollo, HySecurity, Mighty Mule, Ghost Controls, US Automatic and more, residential and commercial.
Can you automate my existing manual gate?
Usually, yes, if the gate and posts are structurally sound. Automation for residential driveway gates depends on the condition of the gate and the site setup. Your existing gate gets an operator, safety sensors and entry controls.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Gate Service in Kirby
For Kirby gate repair, a yard slide gate that is down or a new driveway gate with a variety of style and automation options, call (888) 217-2664 and we will send a truck from our San Antonio office.