★★★★★  5.0 · 1,037+ Google reviews

Genie Garage Door Repair

Genie openers run a large share of Texas garages, from the screw-drive units of the 1990s to today's belt-drive and wall-mount models with Aladdin Connect, and Garage Tec repairs, services and replaces the full Genie line. Our trucks carry Genie carriages, couplers, logic boards, capacitors, Safe-T-Beam sensors, remotes and keypads, so a Genie garage door repair is usually finished in one visit, with a written price before work begins. We serve Dallas–Fort Worth, Austin, San Antonio and Houston from local offices, seven days a week.

Genie Garage Door Repair Tech

Genie Garage Door Opener Repair

Genie Garage Door Opener Repair

Screw-drive carriage and coupler wear

The classic failure on older Genie screw-drive units: the screw turns, the door does not move, or it jerks and stalls. Carriages and couplers are carried on the truck.

Logic board failure

Storm surges take out Genie boards every spring; replaceable on nearly every model.

Safe-T-Beam sensor problems

A door that reverses before closing or a blinking red light on the sensor is a blocked or misaligned beam, not a bad opener.

Remotes, keypads and Aladdin Connect

Intellicode reprogramming after a power outage, dead batteries, Wi-Fi reconnection and app setup.

Belt and chain wear

Cracked belts and slack chains re-tensioned or replaced on the newer models.

Capacitor and motor failure

A humming unit that will not start is usually the capacitor; a burned motor on an older unit is where we talk about replacement.

Battery backup

Replacement batteries for backup-equipped Genie models.

Genie Openers We Install

Genie Openers We Install

Belt drive (StealthDrive 750, ChainMax and SilentMax lines)

Quiet operation for garages under living space, with Aladdin Connect and battery backup options.

Chain drive (ChainDrive 550, 750)

The economical workhorse for detached garages.

Wall-mount (Genie 6170H, 6070H)

Clears the ceiling for storage or a lift.

Aladdin Connect

Phone control, alerts and delivery access on current models, or added to an existing opener as a retrofit kit.

Every installation includes

Removal of the old unit, new rail where needed, Safe-T-Beam sensors and wall console installed and tested, remotes and keypad programmed, and the safety reverse demonstrated.

Repair or Replace a Genie Opener

If the unit is under ten years old and the failure is a carriage, board, capacitor or sensor, repair is the better money and we do it the same visit. The 1990s and early-2000s screw-drive units are where replacement starts to make sense: parts are thinning out, they are loud, and they lack the battery backup and smart features a modern opener brings. We put both numbers in writing and let you choose.

Repair or Replace a Genie Opener

Why Choose Garage Tec for Genie Repair

  • Genie parts on the truck – carriages, couplers, boards, capacitors, Safe-T-Beam sensors, remotes and batteries for the common models.
  • Doors and gates from one company – the opener in the garage and the operator on the driveway gate are the same crew and the same number.
  • Honest repair-versus-replace math – both numbers in writing, and the recommendation we would choose at our own house.
  • Same-day service seven days a week – across Dallas–Fort Worth, Austin, San Antonio and Houston.
  • Written price before work begins – no surprise charges.
  • Licensed, bonded and insured – rated 5.0 stars across more than 1,000 Google reviews.

Genie Repair FAQs

My Genie screw drive turns but the door does not move. What is it?

Usually a worn carriage or coupler, both carried on the truck and replaced the same visit. If a spring is broken, that is the real cause and it gets fixed first.

The red light on my Genie sensor is blinking. What does it mean?

The Safe-T-Beam is blocked or misaligned. Realignment or a new sensor fixes it the same visit.

Can you set up Aladdin Connect on my phone?

Yes, on current models, and we can add a retrofit kit to many older Genie openers.

My Genie remote stopped working after a power outage. Why?

Intellicode units sometimes lose their programming on a power event. Reprogramming takes a few minutes.

My Genie died after a storm. Fixable?

Usually. The logic board is replaceable on most Genie units, and we can add surge protection.

How much does Genie repair cost?

Remotes, sensors and limit adjustments sit at the affordable end; carriages and boards cost more; a new opener is quoted separately. You get an exact written price before any work starts.

Do you work on the old Genie Pro and Excelerator units?

Yes, as long as parts are still available, and we tell you up front when they are not.

WE SERVICE AND INSTALL ALL MAJOR BRANDS

LiftMaster
Chamberlain
Craftsman
Clopay
Wayne Dalton
Amarr

Get in Touch

Call us 24/7

Same-day and emergency service, 24 hours a day, 7 days a week.

Schedule online

Book Online in 60 Seconds
Pick a time that works and we'll confirm it.

Email us

info@garagetec.org
For quotes, questions, or anything that isn't urgent.

Hours

Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.

Send us a message

Schedule Genie Repair

Call for same-day Genie garage door opener repair or a new installation, and we will send a stocked truck from the office nearest you with a written price before work begins.