★★★★★ 5.0 · 1,037+ Google reviews
Floresville Gate Repair
Floresville is the Wilson County seat, and the gates around it are mostly ranch entrances. Cattle and hay operations along US 181, SH 97 and FM 536 run pipe gates on solar operators far from any meter, the newer subdivisions toward La Vernia have community and driveway gates, and the oilfield service yards that came with the Eagle Ford use heavy slide gates under truck traffic all day.
What breaks gates here is sandy loam and clay that shift between rain and drought, livestock and trailers hitting gates, lightning across open country, and solar batteries that quit in winter. Our trucks carry solar and low-voltage operators, boards, hinges and batteries, same-day seven days a week, with a written price before work begins.
Floresville calls are dispatched from our San Antonio office.
Gate Repair in Floresville, TX
A call for automatic gate repair in Floresville is most often a ranch gate with a dead solar battery, a pipe gate bent by a trailer or a cow, or a slide gate at a service yard that has worn out under truck traffic. We carry Mighty Mule, Ghost Controls, LiftMaster and commercial operator parts and fix most of it on the first trip. Expect a repair of complete gate systems, not just the operator, usually completed the same day.
Gate opener repair
All major operator brands, including LiftMaster, DoorKing, Viking and HySecurity. Burned-out motors, stripped gears, slipping clutches and failed boards.
Gates stuck open or closed
Top of the dispatch list in Floresville, since either failure causes a problem right away.
Gate opens but won't close
We check the safety devices first, since a blocked eye, a worn edge or a stuck loop detector is the common cause.
Sliding gate repair
Noisy, sticking or derailed slide gates brought back to smooth travel.
Swing gate repair
Sagging panels, seized hinges and posts that have leaned in Wilson County sandy loam and clay, which loses its grip on a post in a drought and heaves it again after a wet spell.
Apartment and community gate repair
The newer subdivisions on the north side of Floresville and the rental properties near the courthouse square count on entrance and driveway gates working every day, and property managers here get priority response.
Access control, loop and sensor repair
Entry systems serviced end to end, from the keypad at the curb to the loop in the drive.
Storm and surge damage
Control boards knocked out by lightning are replaced, and surge protection can be added so the next storm does not repeat it.
Welding and structural repair
On-site welding and straightening for bent pickets, split welds and impact damage.
Automatic and Manual Gates Replacement in Floresville
Repeated repairs on an aging gate add up quickly, and at some point a replacement is the smarter spend. Signs it is time: rusted frames or post bases, posts leaning out of plumb, an operator with no parts left and no UL 325 safety, or a light gate on a busy entrance. In Floresville, driveway gate installation usually starts around $1,500 and can run to $6,000 depending on the setup.
A pipe gate that has rusted through at the ground or been straightened one time too many, or a 1990s operator with no parts left, calls for gate replacement in Floresville. We match the new gate to the operation, from a cattle guard entrance to a subdivision driveway, and final cost depends on gate width, design, and materials. Wider driveways and double-gate layouts need heavier supports and can push the price higher. Nothing healthy gets thrown out. Sound posts and working operators stay, and you see both numbers before any decision. Basic manual driveway gates often run about $300 to $1,500, standard automatic driveway gates usually fall between $1,900 and $6,000, and most automatic gate installation budgets land around $2,500 to $5,000; large custom wrought iron security systems can reach roughly $3,000 to $12,000.
Driveway Gate Installation in Floresville
Most driveway gate installation in Floresville is ranch work: pipe, wood-clad or ornamental swing and slide gates on solar operators along FM 536, SH 97 and the county roads, sized for stock trailers and hay equipment. In Texas, installing a driveway gate does not require a state license, and our insured crews handle the work to code. For homes in town and in the north-side subdivisions we install ornamental steel and aluminum gates with keypad and phone-app control. Posts are set deep to hold in shifting soil.
Estate and driveway swing gates
Steel and aluminum swing gates in one or two leaves, built to suit Floresville driveways.
Sliding and cantilever gates
A space-saving choice for tight setbacks, grades and commercial traffic.
Custom ornamental iron
Custom scrollwork, laser-cut panels and lettering, with fence sections to match.
Community and apartment entrances
Heavy-duty operators built for constant traffic, plus call boxes, app access and resident credentials.
Commercial slide, cantilever and barrier-arm systems
Heavy slide and barrier systems for Floresville businesses that move vehicles all day.
Every installation includes an honestly sized operator, battery backup or solar where needed, UL 325 safety devices installed and tested, a written workmanship warranty, and a walkthrough of the access controls before we leave. Automatic gate operators can be solar-powered where utility power is not practical. A sound manual gate does not need replacing; we can motorize it. Access-control add-ons can raise project cost by $1,000 to $5,000, and while automatic driveway gate installation averages about $2,322 nationwide, local pricing here depends on gate size, operator type and site conditions.
Floresville Gate Company
A Floresville gate company should understand that a gate on a working ranch is equipment, not decoration. We handle service and installations, replace batteries before they strand you, upgrade operators as traffic changes, and cover the garage door and shop door on the same visit.
Automation and access control
Correctly sized operators and the full range of access control, from keypads to phone apps.
Preventive maintenance
Regular visits to adjust alignment, lubricate the operator and test every safety device. It is the cheapest way to keep a heavily used gate out of the repair queue.
Priority response for property managers
A down entrance is a property-wide problem, and we treat it like one with priority dispatch.
Solar and off-grid
A good fit for properties outside Floresville proper where the gate sits far from the house.
Serving Floresville, San Antonio, and Surrounding Communities
We serve all of Floresville, TX, from the courthouse square and the homes along Third Street and US 181 to the subdivisions on the north side and the ranches out SH 97, FM 536 and FM 775, plus the surrounding area: La Vernia, Poth, Stockdale, Sutherland Springs, Elmendorf, Pleasanton, Falls City, Kenedy and southeast San Antonio. Floresville residents with permit or local requirement questions should confirm current rules with the city or building department before project start. Floresville calls are dispatched from our San Antonio office, so a truck is usually a short run down US 181. For an estimate visit, we can usually be on site within a couple of days, depending on permit review and material lead times.
Floresville service
Garage Tec Automatic Gates & Garage Door Repair
(888) 217-2664 · Open 24 hours, 7 days a week
info@garagetec.org
Why Floresville Chooses Garage Tec
- Gates are core work, not a sideline – operators, access control and ironwork are our specialty, and we handle the garage door as well.
- Working-ranch gate experience – Floresville gates carry stock trailers, hay trucks and feed deliveries. We size operators, hinges and posts for that use and set solar systems to ensure they run through winter.
- Oilfield-yard slide gates – Service yards around Floresville see heavy truck traffic all day. We install and maintain commercial-rated slide gate operators with loop detection and card or keypad access for that duty.
- Honest replace-vs-repair math – we quote repair and replacement side by side and tell you which we would choose.
- Same-day service – fully stocked trucks mean fewer return trips and same-day fixes, even on weekends.
- Upfront pricing – a dedicated written quote you approve before any work begins, built to meet the gate and site conditions. For installation work, labor in San Antonio and Floresville commonly runs about $50 to $150 per hour depending on the gate and site conditions. No surprise charges.
- Licensed, bonded and insured – full coverage on every visit.
- Reviews you can verify – 1,037+ Google reviews at a 5.0-star average. Read a few before you call.
Floresville Gate FAQs
Do you offer same-day gate repair in Floresville?
Yes, in most cases. The common gate parts are on board, so most repairs happen on the first trip. Priority dispatch applies to any gate stuck open or closed. The earlier you call, the more likely we can come today.
My gate opens but won't close. What's wrong?
Almost always a safety device: a blocked or misaligned photo-eye, a faulty edge, or a vehicle loop stuck in detect. The operator is working as designed; the sensor is what needs attention.
Why is my gate or fence post leaning?
Texas clay swells and shrinks with the weather and takes posts with it. We re-set and reinforce posts so gates hang true again instead of shimming the hinge every year.
My ranch gate off FM 536 is a mile from the house. Can I open it for a feed delivery without driving down?
Yes. A cellular app controller or a keypad with a delivery code works on most solar operators, and we can add a call box where there is cell service. We put the options in writing before we install anything.
A cattle trailer backed into our pipe gate and now it will not swing. Is it the gate or the operator?
Usually both took some damage. We straighten or replace the bent panel, check the hinge post, and test the operator arm and gearbox. Everything we find goes on a written price before we begin the repair.
My gate opener died after a thunderstorm. Fixable?
Very likely. The control board is the usual casualty, and it is replaceable on nearly all models. Surge protection is available to prevent it happening again.
How much does gate repair cost in Floresville?
It depends on the failure. Small parts and adjustments are affordable; major components and welding are priced higher. The price is written down and agreed before we begin.
Do you work on all gate opener brands?
Yes. LiftMaster, DoorKing, Viking, Eagle, All-O-Matic, Nice/Apollo, HySecurity, Mighty Mule, Ghost Controls, US Automatic and more, residential and commercial.
Can you automate my existing manual gate?
Usually, yes, if the gate and posts are structurally sound. We automate it with a matched operator, safety devices and access control.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Gate Service in Floresville
For Floresville gate repair, a ranch gate that has quit or a new entrance sized for trailers, call (888) 217-2664 and bring your repair or installation plan to our team. We provide dedicated booking help and a quote shaped to meet your job, and we ensure the next step is clear from the start.
Floresville is part of our Greater San Antonio service area.