★★★★★ 4.9 · 770+ Google reviews
Dallas Gate Repair, Replacement & Gate Company Services
Dallas runs the full range of gates: estate entrances in Preston Hollow, driveway gates on creek-lot streets, apartment entrances cycling around the clock in Uptown and along the tollway, and commercial yards from the Design District to the Stemmons corridor. Garage Tec is the Dallas gate company that covers all of it (repair, replacement, new installation, automation, and maintenance) with one number to call and pricing you approve before any work starts.
Automatic Gate Repair in Dallas
A dead gate is never just an inconvenience in Dallas, TX. Stuck closed, it strands residents and traps vehicles. Stuck open, it turns off the security half the reason the gate exists. Our gate repair services include electric gate repair for homeowners and any business property in Dallas, and we specialize in repairs that restore functionality on automatic gates and every major electric gate system. We treat both as priority calls, diagnose the full system (gate, operator, power, safety devices, and access control) and fix the real cause, usually in one visit.
Before work starts, we provide written, itemized estimates so diagnostic charges and repair costs are clearly separated. Gate repairs we handle across Dallas:
Gate opener repair
All major brands: LiftMaster, DoorKing, Viking, Eagle, All-O-Matic, Nice/Apollo, HySecurity, Mighty Mule, Ghost Controls, US Automatic, and more. Motors, gearboxes, control boards, limits, clutches, and wiring.
Gate won’t open or close
Power failures, blown fuses, failed sensors, and operator lockouts diagnosed and corrected.
Gate opens but won’t close
Almost always a safety device: a blocked photo-eye, a faulty edge, or a vehicle loop stuck in detect. Even insects can block safety sensors and stop proper closing. Common warning signs, and quick once found.
Sliding gate repair
Worn rollers, fouled or bent track, broken chains, and gates that grind, bind, or derail.
Swing gate repair
Sagging panels, seized hinges, bent operator arms, and posts on the move: Dallas clay soil shifts with every wet-dry cycle, and gate posts go with it.
Apartment and community gate repair
High-cycle entrances taking constant traffic and the occasional impatient bumper. Impact damage, worn drive hardware, and overworked operators are daily work for us on Dallas multifamily and commercial gate properties.
Access control repair
Keypads, telephone entry systems, video intercoms, card and fob readers, and remotes repaired and reprogrammed.
Loop and sensor repair
In-ground vehicle loops, free-exit sensors, and photo-eyes serviced and re-tuned.
Storm and surge damage
Dallas thunderstorms are hard on gate control boards. Surge-fried electronics replaced, with protection available against the next strike.
Welding and structural repair
Bent pickets, cracked welds, and vehicle strike damage on steel and iron gates, including ornamental work on the estate gates older Dallas neighborhoods are known for.
Gate Replacement in Dallas
Every gate crosses a line eventually: the point where each repair is really a deposit on the next one. Replacement is usually the smarter money when:
Rust has gone structural
Cosmetic surface rust is fixable; rust through the frame, welds, or post bases is a countdown clock, especially on wrought iron gates that aren’t treated properly in humidity.
The posts have failed
Leaning, cracked, or heaved posts (Dallas clay again) often cost more to rescue than to set right from scratch.
The operator is obsolete
Discontinued parts, no modern UL 325 safety compliance, and a repair history that reads like a subscription.
Damage is beyond honest straightening
Some vehicle strikes total a gate, and we’ll say so rather than weld a compromise.
The gate no longer fits the property
A dated gate on a renovated home, or a light-duty gate on an entrance that now sees apartment-level traffic; the right replacement can improve curb appeal, boost aesthetic appeal, and better suit a home or commercial property.
When we replace, we keep what’s genuinely sound (good posts, a healthy operator, working loops) and replace only what isn’t, so the job can be a smart upgrade instead of another temporary fix. And when a repair will truly buy years, we’ll recommend the repair so your entry stays secure. Both numbers, in writing, every time.
New Driveway Gates We Install
Estate and driveway gates
Single and double swing gates and sliding designs in ornamental iron, aluminum, and wood-and-steel combinations, from stately traditional ironwork to clean modern slat designs, matched to the architecture, whether that’s a Preston Hollow traditional or an East Dallas modern. The right design can also enhance your home’s security along with the property’s curb appeal.
Sliding and cantilever gates
The answer for short setbacks, sloped drives, and wide openings; cantilever designs carry the gate with no ground track to foul.
Custom and ornamental gates
Designs built to your fencing and home, including laser-cut names, addresses, and emblems.
Apartment and community entrances
High-cycle slide and swing systems with telephone entry, resident apps, and free-exit loops, engineered for hundreds of cycles a day.
Commercial and industrial gates
For commercial gate solutions for Dallas businesses, we handle slide, cantilever, and barrier arm systems for warehouses, yards, parking structures, and storage properties.
Security gates
Anti-climb designs, extended heights, and heavy construction.
Pedestrian gates
Access-controlled walk gates matched to the main entrance, whether you’re installing residential gates or larger commercial systems.
Automation, Access Control, and Professional Gate Maintenance
Operators sized honestly
Operators sized honestly: residential through continuous-duty commercial, matched to the gate’s true weight, length, and daily cycle count. Electric gate motors typically last 10–15 years with proper care, and proper sizing is a big part of that lifespan.
Battery backup and solar
Gates that work through outages, and solar packages for entrances far from power.
Access control
Keypads, video intercoms, telephone entry, card readers, and smartphone apps for electric gate and automatic gates systems, with entry logs and guest codes.
Traffic management
Free-exit loops, auto-close timers, and barrier arms for lots and garages.
UL 325 safety on every job
Photo-eyes and safety edges installed, configured, and tested before we leave.
A Dallas Gate Company for the Long Run
Anyone can sell a gate. A gate company sticks around for everything after:
Preventive maintenance programs
Scheduled service covering operators, hinges, rollers, chains, safety devices, and access control, for single driveways, HOA entrances, apartment communities, and multi-property portfolios, with documented records for boards and managers. Annual servicing of driveway gates is highly recommended for optimal performance, and regular maintenance can extend a gate’s lifespan significantly. Residential gates are often opened about twice daily, while commercial gate systems cycle far more often, so long-term plans are built around actual use to provide reliable service and assist over time.
Access control upgrades
Keypad-only systems modernized with video intercoms, app access, and entry logging, with upgrades planned to support long-run reliability.
Safety compliance updates
Older automated gates brought up to current UL 325 entrapment standards: real liability protection for multifamily and commercial owners.
Property management support
One point of contact across a portfolio, with priority response when an entrance goes down.
Emergency response
Priority dispatch for gates stuck open or closed.
Serving Dallas and Surrounding Communities
We serve all of Dallas, TX (North Dallas, East Dallas, Oak Cliff, Uptown, and everywhere between) plus Highland Park, University Park, Addison, Richardson, Garland, Mesquite, Irving, Farmers Branch, Plano, and nearby areas across Texas.
Our Dallas office
Garage Tec Automatic Gates & Garage Door Repair
9965 Royal Ln, Ste 35, Dallas, TX 75231
(469) 589-1155 · Open 24 hours, 7 days a week
Why Dallas Chooses Garage Tec
- The whole system, one company – Gate, operator, safety devices, and access control together: no finger-pointing between a welder, an electrician, and an access vendor for metro gate repair.
- High-cycle experience – Apartment and commercial entrances that never stop cycling are core work, not a stretch, with expert solutions for demanding systems.
- Estate-grade craftsmanship – Ornamental repair and custom fabrication for the gates that are part of the architecture and enhance security.
- All major operator brands – Including the DIY brands other companies won’t service, with familiarity across top brands and warranties on parts and labor where applicable.
- Priority response – Fast dispatch when a gate is stuck open or closed, backed by exceptional gate repair services.
- Upfront pricing – A written, itemized quote you approve before work begins.
Dallas Gate FAQs
How much does gate repair cost in Dallas?
It depends on the cause. Sensor, remote, and hinge repairs sit at the affordable end; operator replacement and structural welding cost more. For repair in Dallas, TX, we start with on-site diagnosis and a written estimate that separates diagnosis from repair, so you can request a quote before approving the work. After-hours emergency service may carry additional charges.
How much does gate replacement cost in Dallas?
Pricing depends on gate size, material, design, operator, and access control, and on how much of the existing system is sound enough to keep. An on-site assessment gives exact numbers, with a repair option priced alongside whenever it’s viable.
Should I repair or replace my gate?
Sound frame plus a failed hinge, roller, or operator: repair. Structural rust, failed posts, or a repair history that keeps growing: replacement is the better money. You’ll see both prices and our honest recommendation.
Do you repair apartment and community gates in Dallas?
Yes: multifamily entrances are a specialty: high-cycle operators, telephone entry, loop repair, impact damage, maintenance programs, and priority response for property managers.
Why does our gate open but refuse to close?
Nine times out of ten, a safety device doing its job too well: a blocked photo-eye, a faulty edge, or a loop stuck in detect, sometimes with unusual noises. Fast fix once found.
Our gate died after a thunderstorm. Fixable?
Very likely. Surges most often take out the control board, which is replaceable, and we can add surge protection against the repeat.
Why is my gate post leaning?
Welcome to Dallas clay: it swells and shrinks with the weather and takes posts with it. We re-set and reinforce posts so the gate hangs true again.
Can you automate my existing manual gate?
Usually, yes, if the gate and posts are structurally sound. We add the operator, safety devices, and access control to what you have, and we also check for electrical issues before automation starts. Electric gate motors often last 10–15 years with proper care.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Gate Service in Dallas
Repair today, an honest replacement, or a brand-new entrance built for your property: Garage Tec is the Dallas gate company that handles it start to finish and answers the phone afterward. Call (469) 589-1155 to request service or a free estimate for secure operation at residential and commercial properties across Dallas, TX.