★★★★★ 5.0 · 1,037+ Google reviews
Craftsman Garage Door Repair
Craftsman garage door openers were sold through Sears for decades, and there are still thousands of them running in Texas garages. The good news for owners is that Craftsman openers were built by Chamberlain, so the gears, logic boards, capacitors, sensors and remotes are still available and Garage Tec carries them on the truck.
We repair and service Craftsman chain-drive, belt-drive and screw-drive openers and replace them with a LiftMaster or Chamberlain equivalent when a unit has reached the end of its life, with a written price before work begins.
We serve Dallas–Fort Worth, Austin, San Antonio and Houston from local offices, seven days a week.
Craftsman Garage Door Opener Repair
Stripped drive gear
The most common Craftsman failure: the motor runs, the door does not move. Chamberlain gear kits fit and fix it for a fraction of a new opener.
Logic board failure
Storm surges take out boards every spring; replaceable on most Craftsman models using Chamberlain boards.
Safety sensor problems
A door that reverses before closing is almost always a blocked or misaligned photo-eye, not a bad opener.
Remotes and keypads
Lost codes after a power outage, dead batteries and replacement remotes; Chamberlain and LiftMaster universal remotes pair with most Craftsman units.
Chain and belt wear
Slack chains and cracked belts re-tensioned or replaced, with the rail checked for alignment.
Capacitor and motor failure
A humming unit that will not start is usually the capacitor; a burned motor is where we talk about replacement.
Screw-drive units
The older Craftsman screw drives share parts with Genie; we carry those too.
Repair or Replace a Craftsman Opener
Craftsman openers are no longer made, so every one in service is at least a few years old and many are 20 or more. If the failure is a gear, board, capacitor or sensor and the motor is healthy, repair is the better money and we do it the same visit. If the motor has failed, the unit has no safety sensors, or the repair bill approaches half the price of a new opener, we quote a replacement in writing alongside the repair and let you choose.
Repair
Gears, boards, capacitors, sensors, remotes and chains, carried on the truck.
Replace with LiftMaster
The professional version of the same family, with a longer warranty, a quieter belt drive, battery backup and myQ.
Replace with Chamberlain
The direct retail successor, if you prefer to stay with what you know.
Both numbers in writing
Before any work starts.
Craftsman Openers We Service
Chain-drive models
The 1/2 HP and 3/4 HP units installed from the 1990s through the 2010s, by far the most common.
Belt-drive models
The quieter DieHard-battery-backup units from the later years.
Screw-drive models
The older Genie-built Craftsman units, serviced while parts last.
Keypads, remotes and wall consoles
Replaced or reprogrammed, including universal remotes that work with Craftsman's Security+ rolling code.
Why Choose Garage Tec for Craftsman Repair
- The right parts on the truck – Chamberlain gear kits, boards, capacitors, sensors and remotes that fit Craftsman openers.
- Honest repair-versus-replace math – both numbers in writing, and the recommendation we would choose at our own house.
- Doors and gates from one company – the opener in the garage and the operator on the driveway gate are the same crew and the same number.
- Same-day service seven days a week – across Dallas–Fort Worth, Austin, San Antonio and Houston.
- Written price before work begins – no surprise charges.
- Licensed, bonded and insured – rated 5.0 stars across more than 1,000 Google reviews.
Craftsman Repair FAQs
Craftsman openers are discontinued. Can you still get parts?
Yes. Craftsman openers were built by Chamberlain, so gears, boards, capacitors, sensors and remotes are still available for most models.
My Craftsman opener hums but the door does not move. What is it?
Usually a stripped drive gear or a failed capacitor, both repairable the same visit. If a spring is broken, that is the real cause and it gets fixed first.
My Craftsman remote is lost. Can you replace it?
Yes. Chamberlain and LiftMaster remotes pair with most Craftsman units, and we program them on the spot.
Should I repair a 20-year-old Craftsman or replace it?
If the motor is healthy and the failure is one part, repair. If the motor has failed or it has no safety sensors, replacement is the better money, and we quote both.
My Craftsman died after a storm. Fixable?
Usually. The logic board is replaceable on most units, and we can add surge protection.
How much does Craftsman repair cost?
Remotes, sensors and limit adjustments sit at the affordable end; gear kits and boards cost more; a new opener is quoted separately. You get an exact written price before any work starts.
What should I replace a Craftsman with?
LiftMaster is the professional version of the same family and the usual recommendation; Chamberlain is the retail equivalent. We install both.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Craftsman Repair
Call for same-day Craftsman garage door opener repair or a replacement, and we will send a stocked truck from the office nearest you with a written price before work begins.