★★★★★ 4.9 · 770+ Google reviews
Irving Garage Door Repair, Replacement & Gate Services
Irving sits at the crossroads of the metroplex (literally, with DFW Airport on one side and downtown Dallas on the other) and its doors and gates work like it. Established neighborhoods in south Irving, apartment and townhome communities packed through Las Colinas and Valley Ranch, and warehouses and office parks running the freight and business of the region. Garage Tec covers it all: garage door repair and replacement, gate repair and replacement, and every spring, opener, and keypad in between, with stocked trucks and a written price before any work begins.
Irving Garage Door Repair
Our technicians start with an inspection and provide clear explanations before repair begins, then arrive carrying the parts most likely to be yours. Garage door repair in Irving costs $125 to $350 on average, and most calls are still diagnosed, quoted in writing, and finished in one visit:
Broken spring replacement
The bang, then a door that won’t lift. Garage door spring repair and replacement are handled same day in most cases, with spring repair completed using stocked sizes on every truck and in pairs on two-spring doors; North Texas heat can weaken garage door springs over time, and broken springs remain one of our busiest calls in South Irving and after the first hard freeze of the year.
Garage door opener repair
Openers that hum, grind, or ignore the remote, with garage door opener problems serviced across LiftMaster, Chamberlain, Genie, Craftsman, and every major brand, from the aging units in Irving’s established neighborhoods to the builder-installed openers in newer Valley Ranch garages. Storm-surged boards are replaceable, and we can add protection.
Doors off track
Re-set safely, with the bent track, worn roller, or frayed cable behind it corrected.
Cable, roller, and hinge replacement
The wear parts behind loud, rough-running doors; nylon roller upgrades matter double in townhomes where the garage shares a wall with living space.
Panel replacement
Vehicle bumps and North Texas hail usually mean swapping sections, not buying a door. Door-wide denting gets both paths priced in writing for the insurance conversation.
Safety sensor repair
Doors that won’t close unless you hold the button, fixed on the spot.
Tune-ups
Annual balance testing, lubrication, and hardware service that includes checking tracks for debris and lubricating moving parts; these general repairs and routine maintenance can extend a garage door’s lifespan significantly.
Garage Door Replacement in Irving
When a door has earned retirement (decades of cycles, panels past matching, rust through the sections) replacement transforms the biggest surface on the front of the house in an afternoon, gives you a new garage door with better function and curb appeal, and ends the repair calls for good.
Replacement usually wins when: the door is 15–20+ years old, multiple panels are damaged or the model is discontinued, rust or fatigue runs door-wide, or repairs approach half the cost of new. When a repair honestly buys years, that’s the recommendation instead, both numbers, in writing, so you can choose the right job for the property.
Doors we install across Irving for garage door installation projects:
Insulated steel doors
The Texas default: cooler attached garages, quieter operation, stronger panels, and a meaningful upgrade over the uninsulated originals on many south Irving homes.
Carriage house and designer doors
Character for established streets and the master-planned looks of Las Colinas.
Modern aluminum and glass doors
Clean contemporary designs for newer builds and townhomes.
Custom sizes
Older garages with non-standard openings and tight townhome configurations handled alike.
Garage door openers
Quiet belt drives for shared-wall living, wall-mounted units that free the ceiling, and smart openers with phone control and battery backup for storm season; opener installation can often be completed in about four hours.
Every replacement includes removal and haul-away of the old door, new springs and hardware matched to the new door’s weight, opener connection, and complete balance and safety testing, and every new garage door installation includes completed work backed by warranties on labor and quality parts.
Commercial Doors in Irving
Between the airport freight corridors and the office parks, Irving runs on commercial doors, and we keep them running: sectional and rolling steel door repair, high-cycle springs, commercial operators, forklift impact damage, and preventive maintenance programs, with priority dispatch when a bay is down.
Irving Gate Repair
Irving may run more gated entrances per square mile than anywhere in the metroplex (apartment communities, townhome complexes, office parks, and secured yards) and we repair all of them, from an automatic gate or electric gate at a commercial entry to the driveway gate in between:
Gate opener repair
All major brands: LiftMaster, DoorKing, Viking, Eagle, All-O-Matic, Nice/Apollo, HySecurity, Mighty Mule, Ghost Controls, and more, including automatic gate repair for opener issues and integrated access controls.
Gates stuck open or closed
Priority response; a stuck entrance backs up residents fast, and a stuck-open gate turns off the security a whole community depends on. Emergency repairs are available 24/7 for urgent gate failures.
Gate opens but won’t close
Almost always a safety device: a blocked photo-eye, a faulty edge, or a vehicle loop stuck in detect.
Apartment and community gate repair
The Irving specialty: high-cycle entrances taking constant traffic and the occasional impatient bumper. Impact damage, worn drive hardware, overworked operators, and telephone entry faults handled fast, with documented service for property managers.
Sliding gate repair
Worn rollers, fouled track, broken chains, and gates that grind or derail under heavy daily cycling.
Swing gate repair
Sagging panels, seized hinges, and posts nudged out of plumb by North Texas clay.
Access control, loop, and sensor repair
Keypads, telephone entry, video intercoms, card readers, vehicle loops, and photo-eyes serviced and reprogrammed, including access controls tied to solar-powered gate openers for sites without electricity.
Storm and surge damage
Lightning-fried control boards replaced, with surge protection available against the next strike.
Welding and structural repair
Bent pickets, cracked welds, and vehicle strike damage.
Over 500 customers trust local providers for quality gate services.
Gate Replacement in Irving
We keep what’s sound (good posts, healthy operators, working loops) and replace what’s finished. New gates include high-cycle apartment and community entrances with telephone entry, resident apps, and free-exit loops; commercial slide, cantilever, and barrier-arm systems for yards, office parks, and parking structures; residential driveway gate swing and sliding systems in iron, aluminum, and wood-and-steel combinations, with custom iron gates fabricated to match existing fencing; and security gates in anti-climb designs, every one with a continuous-duty operator where the traffic demands it and UL 325 safety devices installed and tested, with several options for layouts and controls that support reliable access.
High-cycle life wears gates out faster than anywhere, and Irving entrances earn replacement honestly: drive hardware and operators consumed by relentless traffic, impact damage past straightening, rust through frames and post bases, or a light-duty system that was never rated for apartment-level cycling in the first place.
Have a sound manual gate? We can automate what you already have, so you can rest easy knowing replacement parts and new controls are set up for safe, dependable operation.
Serving Irving and Surrounding Communities
We serve all of Irving, TX (south Irving, Las Colinas, Valley Ranch, and everywhere between) plus Grand Prairie, Grapevine, Coppell, Farmers Branch, Euless, west Dallas, and nearby communities.
Our Irving office
Garage Tec Automatic Gates & Garage Door Repair
600 E John W Carpenter Fwy #250, Irving, TX 75062
(469) 998-7422 · Open 24 hours, 7 days a week
Why Irving Chooses Garage Tec
- High-cycle specialists – Apartment, townhome, and office-park entrances that never stop cycling are core work, not a stretch, and our team handles them with the experience and credentials needed for high-use systems.
- Doors and gates, one call – The garage door, the community gate, the openers, and the access control from a single company, with professional service and clear communication that keep repairs moving without confusion.
- Property management support – One point of contact across a portfolio, documented service records, and priority response when an entrance goes down, backed by efficient service that helps reduce disruption.
- Residential and commercial – The same trucks that fix a south Irving garage keep the freight corridors’ bays running, with solutions built for homeowners as well as commercial properties.
- Same-day repair available – Stocked trucks make most repairs one-visit jobs, and that focus on quality helps restore safe, reliable operation faster.
- Upfront pricing – A written quote you approve before any work begins, plus proper licensing and insurance that help protect homeowners during repairs.
- Local reputation – If you are comparing local garage door repair options, ask about experience, credentials, and whether over 200 five-star reviews in Irving reflect excellent service and real customer satisfaction.
Irving FAQs
Do you offer same-day garage door repair in Irving?
Yes, in most cases. We offer same day service for urgent issues, and emergency garage door repairs may require rapid dispatch or 24/7 availability. Springs, opener parts, cables, and rollers ride on every truck. Call early in the day for the best odds.
Do you repair apartment and community gates in Irving?
Yes: multifamily entrances are a specialty: high-cycle operators, telephone entry, loop repair, impact damage, maintenance programs, and priority response for property managers across Las Colinas, Valley Ranch, and the rest of the city.
How do I know if my garage door needs replacement instead of repair?
Age past 15–20 years, multiple damaged panels, a discontinued model, or repairs nearing half the cost of new all point to replacement. Both prices in writing, with an honest recommendation. It’s smart to compare at least three written estimates before choosing a provider.
Why does our gate keep wearing out operators?
Almost always because the operator’s duty rating sits below the entrance’s real cycle count. High-traffic Irving entrances need continuous-duty equipment, and we spec it honestly.
Why does our gate open but refuse to close?
Nine times out of ten, a safety device: a blocked photo-eye, a faulty edge, or a vehicle loop stuck in detect. Usually a fast fix so the gate can close properly again.
My opener or gate died after a thunderstorm. Fixable?
Very likely. Surges most often take out control boards, replaceable on both garage door openers and gate operators, and openers can also be affected by heat, dust, and power fluctuations. We can add surge protection against a repeat.
Hail dented my garage door. Repair or replace?
A panel or two: repair. Denting across the face: replacement usually wins on value and is often the insurance-supported path. Both numbers, documented.
Do you service commercial doors near the airport corridors?
Yes: sectional and rolling steel doors, dock doors, and heavy-duty operators, with priority dispatch for businesses and maintenance programs for single facilities and portfolios.
WE SERVICE AND INSTALL ALL MAJOR BRANDS
Get in Touch
Call us 24/7
Same-day and emergency service, 24 hours a day, 7 days a week.
Schedule online
Book Online in 60 Seconds
Pick a time that works and we'll confirm it.
Email us
info@garagetec.org
For quotes, questions, or anything that isn't urgent.
Hours
Open 24 hours, 7 days a week
No door or gate issue waits for business hours, and neither do we.
Send us a message
Schedule Service in Irving
From a south Irving garage to a Las Colinas community entrance to a freight bay by the airport, Garage Tec covers Irving’s doors and gates start to finish. Call (469) 998-7422 for fast service and a free estimate.